I noticed my door wasn’t closing flush with the frame, which was causing annoying drafts and slight misalignment. Instead of calling a handyman, I decided to tackle the problem myself by adjusting the hinges. It turned out to be an easy fix! Here’s how I did it:
Step-by-Step Guide to Adjusting Door Hinges
1. Inspect the Hinges
First, I closely examined the hinges to see if they were loose or misaligned. Sometimes, even a slight shift can cause noticeable gaps between the door and the frame.
2. Tighten the Screws
Using a screwdriver, I checked all the screws on the hinges. A few of them were loose, which was likely contributing to the problem. I tightened them up, and the door already felt a bit more secure.
3. Add a Washer for Extra Adjustment
Even after tightening the screws, the gap wasn’t completely gone. So, I inserted a thin washer behind the hinges to push the door slightly into a better position. This trick worked wonders in realigning the door.
4. Test the Door
Once everything was in place, I tested the door by opening and closing it several times. It finally closed properly, with no more uneven gaps!
Fixing my misaligned door was much easier than I expected, and I didn’t need any fancy tools—just a screwdriver and a washer. If your door isn’t closing properly, I highly recommend trying these simple hinge adjustments before spending money on a professional repair!
